OpenWRT Connector Install


The Agilicus Connector can install on an embedded router product such as OpenWRT. The devices (usually) have either an MIPS or an Arm processor. The instructions are the same for each, but the link is different. The instructions below are for a OpenWRT Router but will be similar on other devices. Select the proper processor (ARM/MIPSBE/MIPSLE) according to your hardware.

See NanoPi R5S for a specific device and instructions.

No changes are needed to your firewall. No VPN is needed. You can administer users via their Active Directory or Apple, Google, Linkedin accounts.

The high level steps are:

  1. Enable SSH on your Router
  2. Create a Connector (Agilicus admin interface)
  3. SSH to the Router
  4. Paste the given command line

after this, the Agilicus Connector will be entirely automatic, and controlled via the Agilicus admin interface. You may uninstall it at any time with

Create Connector

First we will create a Connector. This logical endpoint allows reverse inbound connectors to safely occur.

We give the connector a name. This is used for statistics and diagnostics purposes. Select the Linux instructions, and select Copy.

Now, SSH to your Router and paste the given command line:

At this stage you are complete, you will see the Connector go online in the web interface in a minute or so.

Return to Product Configuration