# Site Firewall Configuration

- Link: https://www.agilicus.com/anyx-guide/site-firewall-configuration/
- Published: 2025-05-05T02:48:29+00:00
- Author: Don Bowman

1. [Home](https://www.agilicus.com/)
 2. Site Firewall Configuration

## Allow Agilicus AnyX Connector

![Outbound Firewall Configuration: This diagram illustrates a recommended outbound
firewall configuration for AnyX, enhancing network security. It shows traffic flowing
from internal AnyX resources through a firewall to external services, with specific
ports and protocols highlighted for secure communication. Ideal for understanding
AnyX security best practices.](https://www.agilicus.com/www/89d80fb4-outbound-firewall.
svg)

Agilicus AnyX does not require any inbound ports to be open. However, it does require
access to its API and its gateway.

Depending on your site setup, you might have a firewall which blocks traffic in 
the outbound direction, either by IP, by IP + port, or, by DNS or TLS hostname/SNI.

Learn how to setup your site firewall to allow the Agilicus AnyX connector to function.

## Overview

Agilicus AnyX does not require any inbound configuration for your firewall: block
all inbound ports and IP’s. It does, however, require the ability to reach out to
the cloud gateway, and to its API to receive configuration.

### Firewall Rules: Domain __MYDOMAIN__

You have navigated to this page from your admin interface (https://admin.__MYDOMAIN__),
the below values are correct for you, for this domain.

### Firewall Rules: All Regions

**HINT**: If you navigate to this web page from your admin interface (https://admin.
__MYDOMAIN__), the specific rules for you will be filled in above. Below are the
rules for all regions, please select the one that matches your configuration.

---