# Moxa UC-8200 Zero-Trust Connector Install

- Link: https://www.agilicus.com/anyx-guide/moxa-uc-8200-connector-install/
- Published: 2024-05-14T00:23:46+00:00
- Author: Don Bowman

1. [Home](https://www.agilicus.com/)
 2. Moxa UC-8200 Zero-Trust Connector Install

![Moxa UC-8200](https://www.agilicus.com/www/bddbebcc-moxa-uc-8200-series.png)

IIoT Remote Connect

---

## **Moxa UC-8200 Zero-Trust** **Connector Install**

Moxa UC-8200. Agilicus Connector.

[CONTACT](https://www.agilicus.com/contact-us/)

## Overview

![Linux Install Connector](https://www.agilicus.com/www/24b5a7dc-image.png)

connector-install-manual

The [Moxa UC-8200](https://www.moxa.com/en/products/industrial-computing/arm-based-computers/uc-8200-series)
runs [Debian 11 Linux](https://www.debian.org/News/2021/20210814). It is supported
out-of-the-box by the [Agilicus Connector](https://www.agilicus.com/anyx-guide/agilicus-connector/),
using the standard Linux install instructions.

Once installed, you can remotely connect to the Moxa UC-8200, or, resources on adjacent
networks through the Agilicus AnyX platform, regardless of network configuration
or firewall settings.

From the Agilicus Admin web interface, select Resources/Connectors/New. Give the
connector a name, and then select the “Linux” tab, paste the resulting command line
into a root shell and it will automatically setup and configure.